20HHP Multi-turn Potentiometer
Hybrid Potentiometer (Bushingmount) 5-turn and 10-turn
Nyckelfunktioner
- Hybrid
- Dimensions (mm) DxL: 20×18
- Resolution: Essentially infinite
- Independent linearity (±%): 0.35 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
About the 20HHP Multi-turn Potentiometer
The 20HHP is a high resolution, long-life potentiometer with an outer diameter of 20mm.
Bushingmount type:
- 20HHP-5S (5-turn)
- 20HHP-10S (10-turn)
Servomount type:
- 20HHPS-5S (5-turn)
- 20HHPS-10S (10-turn)
Special Specifications Available
Extra taps (available up to 1 tap, Multi-ganged (available up to 2-gangs) , Shaft with front and rear extension (rear shaft with 2mm dia. and 10mm length) Shaft dia. (ø6.35 for 20HHP, ø3.175 for 20HHPS) - bushing with inch dimensions < special Machining on the shaft, With slipping clutch (20mN·m~60mN·m) with a limitswitch adaptor ., simple sealed housing (except servomount type).
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Precision Class: ±0.2% ±0.1% | |
Contact resistance variation | Within 5% C.R.V. (5-turn), Within 3% C.R.V. (10-turn) |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 360º X n ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.35% ±0.25% |
Insulation resistance | Over 100MΩ at 1,000V.D.C. |
Mass | Approx. 20g (5-turn), Approx. 30g (10-turn) |
Max. working voltage | 500V |
Mechanical travel | 360º X n (+10º n: No. of turns) |
Output smoothness | Within 0.05% against input voltage(5-turn), Within 0.015% against input voltage(10-turn) |
Power rating | 1.0W (5-turn), 2.0W (10-turn) |
Resistance temp. coefficient | ±100p.p.m./ºC |
Resolution | Essentially infinite |
Shaft dia. (mm) | 6 |
Standard resistance values | 2k, 5k, 10k, 20k, 50k (Ω) (5turn). 2k, 5k, 10k, 20k, 50k, 100k (Ω) (10turn) |
Starting torque | Within 5mN·m (50gf·cm) (bushingmount type), Within 5mN·m (50gf·cm) (Servomount type) |
Stopper strength | Approx. 0.9N - m (9kgf - cm) (bushingmount type), Approx. 0.9N - m (6kgf - cm) (servomount type) |
Total resistance tolerance | Standard Class ±10%(K) Precision Class ±5%(J) |
Relaterade produkter
Behöver du något annat?
22HHP Multi-turn Potentiometer
- Measuring range 3, 5 or 10 turns
- Low-cost & high resolution
- Various special specifications available
46HDS Multi-turn Potentiometer
- Measuring range 3, 5, 10, 15, 20 or 30 turns
- Resistance range 10Ω -20kΩ to 50Ω -200kΩ
- 46 mm outer diameter
12HHPS Multi-turn Potentiometer
- Measuring range 5 or 10 turns
- High resolution servomount potentiometer
- Various special specifications available