22HHP Multi-turn Potentiometer
Hybrid Potentiometer (Bushingmount) 5-turn and 10-turn
Nyckelfunktioner
- Hybrid
- Dimensions (mm) DxL: 22×19
- Resolution: Essentially infinite
- Independent linearity (±%): 0.25 to 0.1
- Mechanical travel (+10° 0°): 3,600
- Electrical travel (±5°): 3,600
About the 22HHP Multi-turn Potentiometer
The 22HHP is a low-cost, high resolution and long life bushingmount potentiometer with an outer diameter of 22mm.
Bushingmount type:
- 5-turn models: 22HHP-5, 22HHP-5M, 22HHP-5E, 22HHP-5N
- 10-turn models: 22HHP-10, 22HHP-10M, 22HHP-10E, 22HHP-10N
Servomount type:
- 5-turn models: 22HHPS-5
- 10-turn models: 22HHPS-10
Special Specifications Available
Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), 3-turn type, multi-ganged (available up to 10-gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm, ø6.35mm), special machining on the shaft, with plastic shaft, metal bushing type (22HHPM with anti-rotation pin), simple sealed housing, extra taps (available up to 1 tap only for 10turn), slippingclutch incorporated type (20mN·m~60mN·m).
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Precision Class: ±0.2% ±0.1% | |
| Contact resistance variation | Within 5% C.R.V. (5-turn), Within 3% C.R.V. (10-turn) |
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 360º X n ±5º (n: No. of turns) |
| Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.35% ±0.25% |
| Insulation resistance | Over 100MΩ at 1,000V.D.C. |
| Mass | Approx. 20g (Bushingmount), Approx. 30g (Servomount) (both 5-turn and 10-turn) |
| Max. torque exerted on fastening the mounting nut to the bushing | Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier) |
| Max. working voltage | 500V |
| Mechanical travel | 360º X n (+10º n: No. of turns) |
| Output smoothness | Within 0.05% against input voltage (5-turn), Within 0.015% against input voltage (10-turn) |
| Power rating | 1.0W (5-turn) 2.0W (10-turn) |
| Resistance temp. coefficient | ±100p.p.m./ºC |
| Resolution | Essentially infinite |
| Shaft dia. (mm) | 6 |
| Standard resistance values | 1k, 2k, 5k, 10k, 20k, 50k (Ω) (5turn). 2k, 5k, 10k, 20k, 50k, 100k (Ω) (10turn) |
| Starting torque | Within 5mN·m (50gf·cm) |
| Stopper strength | Approx. 0.9N·m (9kgf·cm) |
| Total resistance tolerance | Standard Class ±10%(K), Precision Class ±5%(J) |
Relaterade produkter
Behöver du något annat?
46HDS Multi-turn Potentiometer
- Measuring range 3, 5, 10, 15, 20 or 30 turns
- Resistance range 10Ω -20kΩ to 50Ω -200kΩ
- 46 mm outer diameter
12HHPS Multi-turn Potentiometer
- Measuring range 5 or 10 turns
- High resolution servomount potentiometer
- Various special specifications available
20HHPS Multi-turn Potentiometer
- Measuring range 5 or 10 turns
- Long-life potentiometer
- Various special specifications available