1. Althensensors
  2. Sensorer
  3. Roterande lägesgivare
  4. Potentiometriska rotationsvinkelgivare
  5. 22HP Multi-turn Potentiometer

22HP Multi-turn Potentiometer

Wirewound (Busingmount) Low-cost item - RoHS Compliant


Nyckelfunktioner

  • Wirewound
  • Dimensions (mm) DxL: 22×19
  • Resistance range (ohm): 100Ω -50kΩ
  • Linearity (±%): 0.3 to 0.2
  • Mechanical travel (+10° 0°): 1,800
  • Electrical travel (±5°): 1,800

About the 22HP Multi-turn Potentiometer

The 22HP is our lowest-cost multi-turn potentiometer with an outer diameter of 22mm. This potentiometer has an international patented snapping-in construction.

Features Multi-turn potentiometer 22HP-5

  • Wirewound
  • Dimensions (mm) DxL: 22×19
  • Standard resistance range (ohm): 100Ω -50kΩ
  • Independent linearity (±%): 0.3 to 0.2
  • Mechanical travel (+10° 0°): 1,800
  • Electrical travel (±5°): 1,800

Special Specifications Available

Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), multi-ganged (available up to 10 gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm), special machining on the shaft, with plastic shaft, metal bushing type (22HPM-n with anti-rotation pin), 1, 2, 3, 4, 6, 7 and 8-turn versions are available (these versions have the same outer dimensions, but general specifications are please request us for details), simple sealed housing, slippingclutch incorporated type (20mN·m~60mN·m), extra taps (available up to 1 tap only for 10-turn model), servomount type (same dimensions as 22HHPS-10).

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
(within 5kΩ): (±0.25%) (±0.15%)
Bushing: Glass-filled nylon (for ganged version the bushing is metalbrass without plating)
Housing case: Glass-filled nylon
Precision Class: ±0.2% ±0.1%
Terminals: Gold-plated brass (all terminals can be Fitted with the AMP 110 series faston receptable (2.8x0.5mm) or equivalents
Dielectric strength 1 minute at 1,000 V.A.C.
Electrical travel 360º Xn ±5º (n: No. of turns)
Independent linearity tolerance (5-turn 10-turn) Standard Class: ±0.3% ±0.25%
Insulation resistance Over 1,000MΩ at 500 V.D.C.
Mass Approx. 20g (both 5-turn and 10-turn)
Materials Shaft: Stainless steel
Max. torque exerted on fastening the mounting nut to the bushing Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier)
Max. working voltage 250V
Mechanical travel 360º Xn (+10º n: No. of turns)
Noise Within 100Ω E.N.R.
Power rating 1.0W (5-turn), 2.0W (10-turn)
Resist. temp. coefficient of wire ±20p.p.m./ºC
Shaft dia. (mm) 6
Standard resistance range 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn)
Starting torque Within 10mN·m (100gf ·cm)
Stopper strength Approx. 0.35N·m (3.5kgf·cm)
Total resistance tolerance Standard Class ±3%(H), Precision Class ±1%(F)

Relaterade produkter

Behöver du något annat?

25HP Multi-turn Potentiometer

  • Measuring range 3, 5, 10, 15 or 20 turns
  • Standard resistance range 100Ω -100kΩ
  • Independent linearity ±0.3% to ±0.1%
Datablad Visa produkt

25HPS Multi-turn Potentiometer

  • Measuring range 3, 5, 10, 15 or 20 turns
  • Standard dimensions 25 mm × 30.5 / 39 mm
  • Various special specifications available
Visa produkt

46HD Multi-turn Potentiometer

  • Measuring range 3, 5, 10, 15, 20 or 30 turns
  • Resistance range 10Ω -20kΩ to 50Ω -200kΩ
  • 46 mm outer diameter
Datablad Visa produkt