1. Althensensors
  2. Sensorer
  3. Roterande lägesgivare
  4. Potentiometriska rotationsvinkelgivare
  5. 25HPS Multi-turn Potentiometer

25HPS Multi-turn Potentiometer

Wirewound Potentiometer Servomount type


Nyckelfunktioner

  • Wirewound
  • Dimensions (mm) DxL: 25×30.5 / 25×39
  • Standard resistance range (ohm): 100Ω -50kΩ / 100Ω -100kΩ
  • Independent linearity (±%): 0.3 to 0.2 / 0.2 to 0.1
  • Mechanical travel (+10° 0°): 1,800 / 3,600
  • Electrical travel (±5°): 1,800 / 3,600

About the 25HPS Multi-turn Potentiometer

The 25HPS is a servomount precision type multi-turn potentiometer with an outer diameter of 25mm. There are multi shaft and bushing dimensions available.

Features Multi-turn potentiometer 25HPS-5

  • Wirewound
  • Dimensions (mm) DxL: 25×30.5
  • Standard resistance range (ohm): 100Ω -50kΩ
  • Independent linearity (±%): 0.3 to 0.2
  • Mechanical travel (+10° 0°): 1,800
  • Electrical travel (±5°): 1,800

Features Multi-turn potentiometer 25HPS-10

  • Wirewound
  • Dimensions (mm) DxL: 25×39
  • Standard resistance range (ohm): 100Ω -100kΩ
  • Independent linearity (±%): 0.2 to 0.1
  • Mechanical travel (+10° 0°): 3,600
  • Electrical travel (±5°): 3,600

Special Specifications Available

Lower resistance (10Ω, 20Ω, 30Ω), 3turn type (S25HP3), 15turn type (S25HP15), 20turn
type (S25HP20), extra taps (available up 5 taps), multi-ganged (available up to 2 gangs), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), shaft dia. (ø3.175mm, ø6.35mm) · bushing with inch dimensions, with a limit-switch adaptor, special machining on the shaft.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
(within 5kΩ): (±0.25%) (±0.15%)
Precision Class: ±0.2% ±0.1%
Dielectric strength 1 minute at 1,000 V.A.C.
Electrical travel 360º Xn ±5º (n: No. of turns)
Independent linearity tolerance (5-turn 10-turn) Standard Class: ±0.3% ±0.2%
Insulation resistance Over 100 MΩ at 1,000 V.D.C.
Mass Approx. 50g (5-turn) Approx. 60g (10-turn)
Max. practical resistance value 100Ω (5turn), 200Ω (10turn)
Max. working voltage 900V
Mechanical travel 360º Xn (+10º n: No. of turns)
Noise Within 100Ω E.N.R.
Power rating 1.5W (5-turn), 2.0W (10-turn)
Resist. temp. coefficient of wire ±20p.p.m./ºC
Shaft dia. (mm) 4
Standard resistance range 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn)
Starting torque Within 5mN·m (50gf·cm) (Servomount)
Stopper strength Approx. 0.9N·m (9kgf·cm)
Total resistance tolerance Standard Class ±3%(H), Precision Class ±1%(F)

Relaterade produkter

Behöver du något annat?

46HD Multi-turn Potentiometer

  • Measuring range 3, 5, 10, 15, 20 or 30 turns
  • Resistance range 10Ω -20kΩ to 50Ω -200kΩ
  • 46 mm outer diameter
Datablad Visa produkt

12HHP Multi-turn Potentiometer

  • Measuring range 5 or 10 turns
  • High resolution hybrid potentiometer
  • Various special specifications available
Datablad Visa produkt

20HHP Multi-turn Potentiometer

  • Measuring range 5 or 10 turns
  • High resolution, long-life potentiometer
  • Various special specifications available
Datablad Visa produkt