CP22C Single-turn Potentiometer
1-Turn Potentiometer Metal Housing, Wirewound (Bushingmount)
Nyckelfunktioner
- Wirewound
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.25
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22C Single-turn Potentiometer- Wirewound (Bushingmount)
The CP22C is a low-cost potentiometer with metal housing and rear extended lug terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 taps), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 355º ±5º |
| Independent linearity tolerance | Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kΩ) |
| Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
| Mass | Approx. 30g |
| Max. practical resistance value | 20kΩ |
| Mechanical travel | 360º (Endless) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 0.5W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft diameter (mm) | 6 |
| Standard resistance range | 50Ω to 10kΩ |
| Starting torque | Within 5mN·m (50gf·cm) |
| Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |
Relaterade produkter
Behöver du något annat?
CP22E Single-turn Potentiometer
- Low-cost potentiometer with plastic housing
- Resistance range 50 Ω to 10 kΩ
- Independent linearity ±0.5% to ±0.25%
CP22 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 22.23 x 15 mm
- Resistance range 50 Ω to 10 kΩ
CP30 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 27 x 15 mm
- Resistance range 50 Ω to 20 kΩ