CP22 Single-turn Potentiometer
RoHS Compliant - Wirewound (Servomount)
Nyckelfunktioner
- Wirewound
- Dimensions D x L (mm): 22.23 x 15
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.2
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22 Single-turn Potentiometer- Wirewound (Servomount)
The CP22 is a servomount type potentiometer with ball bearings and a 22mm outer diameter and turret side terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 2 taps), multiganged (available up to 5 gangs. Housing length is extended by 8.5mm per gang), shaft with front and rear extension (rear shaft with 3mm dia. And 10mm length), with stopper (rotating angle becomes 330º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 355º ±5º |
| Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.2% (±0.3% in case of within 1kΩ) |
| Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
| Mass | Approx. 15g |
| Max. practical resistance value | 20kΩ |
| Mechanical travel | 360º (Endless) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 0.5W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft diameter (mm) | 3 |
| Standard resistance range | 50Ω to 10kΩ |
| Starting torque | Within 1.5mN·m (15gf·cm) |
| Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |
Relaterade produkter
Behöver du något annat?
CP30 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 27 x 15 mm
- Resistance range 50 Ω to 20 kΩ
CP45 Single-turn Potentiometer
- Servomount type with ball bearings
- Dimensions (D x L) 41 x 18 mm
- Independent linearity ±0.5% to ±0.1%
CP50 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 50.8x18 mm
- Resistance range 50 Ω to 20 kΩ