1. Althensensors
  2. Sensorer
  3. Roterande lägesgivare
  4. Potentiometriska rotationsvinkelgivare
  5. FSCB50A Sinus Cosinus Potentiometer

FSCB50A Sinus Cosinus Potentiometer

Non-Linear Conductive Plastic (Servomount) SIN/COS Potentiometer


Nyckelfunktioner

  • Dimensions (mm) DxL: 50.8×26
  • Element: conductive plastic
  • Function characteristics: 360°sin/cos
  • Conformity peak to peak (± %): 0.5 to 0.2
  • Mechanical travel: 360°
  • Electrical travel: 360°

About the FSCB50A Sinus Cosinus Potentiometer

The FSCB50A is a servomount type potentiometer with ball bearings and precision sine/cosine output. It is available in multiple diameters.

Standard Specifications Available

Multi-ganged (available up to 3 gangs. Housing length is extended by 16mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), bushingmount type, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft, oil-filled type.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Precision Class ±0.3%
Precision Class ±10% (K)
Super Precision Class ±0.2%
Conformity tolerance (peak-peak) Standard Class ±0.5%
Contact resistance variation Within 8% C.R.V.
Dielectric strength 1 minute at 1,000V.A.C.
Electrical travel 360º (Endless)
Insulation resistance Over 1,000MΩ at 500 V.D.C.
Mass Approx. 120g
Max. working voltage 250V
Mechanical travel 360º (Endless)
Output smoothness Within 0.1% against input voltage
Power rating 1.25W
Resist. temp. coefficient ±400p.p.m./ºC
Resolution Essentially infinite
Shaft dia. (mm) 6
Special higher practical resistance values 20k, 50k, 100K (Ω)
Standard resistance values 1k, 2k, 5k, 10k (Ω)
Starting torque Within 5mN·m (50gf·cm)
Total resistance tolerance Standard Class ±15% (L)

Relaterade produkter

Behöver du något annat?

MPH22 Motor Potentiometer

  • Measuring range: 1 or 10 turns
  • Slipping Torque: 20-30 mN*m or 50 mN*m
  • Reduction gear ratio: multiple
Datablad Visa produkt

MA Turns-counting Dials Potentiometer

  • Measuring range: 3, 5, 10, 15, 20
  • Analog readout
  • Elegant appearance & rigid construction
Datablad Visa produkt

MB Turns-counting Dials Analog Type Potentiometer

  • Measuring range: 10 turns
  • Analog window readout
  • For use with Helicalohm Potentiometers
Datablad Visa produkt