1. Althensensors
  2. Sensorer
  3. Roterande lägesgivare
  4. Potentiometriska rotationsvinkelgivare
  5. MF Turns-counting Dials Analog Type Potentiometer

MF Turns-counting Dials Analog Type Potentiometer

Turns-counting Dials Potentiometer with Analog-Readout


Nyckelfunktioner

  • Read-out: Analog
  • Outer dimensions (mm): 15x18.5
  • Max. Number of turns-counting: 10
  • Macthing shaft dia. (mm): 3, 3.175, 4, 6, 6.35
  • Lock device: Yes

About the MF Turns-counting Dials Analog Type Potentiometer

The MF series is available in four sizes, all having an international patented flexible coupling inside.

Turns-counting dials Potentiometers are designed for use with Helicalohm Potentiometers and multi-turn potentiometers. They have a elegant appearance and rigid construction offering an easy reading, smooth rotation and accurate counting.

Special Specifications Available

Flexible coupling incorporated MF dial is provided with a flexible coupling situated between te shaft of the potentiometer to be mounted and inner dial knob and therefore, the connection is entirely free and only the force of rotating direction is transmittable. With such unique device, traditional trouble such as irregular rotation and ununiform torque due to inaccurate mounting of the potentiometrer on dial can be easily solved. Even the unskilled can mount this MF dial and you can save the labor cost using this MF dial.

Note: When rotating MF dial mounted with multi-turn potentiometer with over 20N (2kgf.) force, the flexible coupling may be damaged or broken. So, please take care of this fact during its operation.

How to mount MF Series

The mounting adaptor as well as specially shaped nut only for use with Model MF Series Dials and
Helicalohm pot. are fixed on the panel according to the illustration given above. The shaft of the Helicalohm pot. is turned anticlockwise to its limit and is put into the mounting hole of the dial which was already set at "0".

At the same time, 4 projections of the mounting adaptor are inserted in 4 receiving holes prepared on the base plate of the dial and then all parts should be pressed to the panel firmly to eliminate any space. The shaft of the potentiometer is fixed by the hexigonal nut positioned in the knob of the dial by screwing it with an attached hexagonal wrench.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Special: 3.175, 4
Combinable helicalohm pot. (matching shaft length of 25mm) 10HP, 25HP, 12HP, 12HHP, 12HPC
Lock device Yes
Mass (approx. g) 15
Matching shaft dia. (mm) Standard: 3
Max. number of turns-counting 10
Model no MF10-15B
Operating temp. range -30ºC ~ +60ºC
Patented flexible coupling Yes

Relaterade produkter

Behöver du något annat?

10HP Multi-turn Potentiometer

  • Measuring range 3, 5 or 10 turns
  • Small wirewound potentiometer
  • Independent linearity ±0.35% to ±0.1%
Datablad Visa produkt

12HP Multi-turn Potentiometer

  • Standard resistance range: 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn)
  • Max. practical resistance value: 70kΩ (5turn), 150kΩ (10turn)
  • Total resistance tolerance: Standard Class ±3%(H), Precision Class ±1%(F)
Datablad Visa produkt

25HP Multi-turn Potentiometer

  • Measuring range 3, 5, 10, 15 or 20 turns
  • Standard resistance range 100Ω -100kΩ
  • Independent linearity ±0.3% to ±0.1%
Datablad Visa produkt