OF30-MCA Oil-filled Potentiometer
Oil-Filled Potentiometer Conductive Plastic (Bushingmount)
Nyckelfunktioner
- Dimensions (mm) DxL: 32×21.5
- Shaft Dia. (mm): 5
- Independent linearity (±%): 1.0 to 0.5
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 280°±5°
About the OF30-MCA Oil-filled Potentiometer
The OF30-MCA is a small sized long-life single turn type potentiometer with an infinite resolution.
Special specifications available
Extra taps (Available up to 1 tap), Special electric travel, Inch dimensional shaft dia. (ø 6.35mm) - Bushing with inch dimensions, Special machining on the shaft, Servomount type
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 280º +5° |
Independent linearity tolerance | Standard Class ±1.0%, Precision Class ±0.5% |
Insolution resistance | Over 100 MΩ at 1,000 V.D.C. |
Mass | Approx. 40g |
Mechanical travel | 360° (Endless) |
Output smoothness | Within 0,1% against input voltage |
Power rating | 1.0 W |
Resist. tem perature coefficient of wire | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Special practical resistance value | 500, 20k, 50k, 100k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
Starting torque | Within 30mN·m (300gf·cm) |
Total resistance tolerance | Standard Class ±10% (K) |
Relaterade produkter
Behöver du något annat?
OF20HHPS Oil-filled Potentiometer
- Measuring range: 3,600 +10°
- Precision multi-turn type with servomount
- Special specifications available
OF46HDS Oil-filled Potentiometer
- Measuring range: 3,600 +10°
- 62mm body diameter
- Special specifications available on request