1. Althensensors
  2. Sensorer
  3. Tryckgivare
  4. Miniatyrtrycksensorer
  5. MP40 Miniature Pressure Transducer

MP40 Miniature Pressure Transducer

Flush mount pressure transducer


Nyckelfunktioner

  • Flush-mountable, cost-effective pressure transmitters
  • Absolute or sealed reference options
  • Strong signal / strong full scale
  • Versions with long-term stability
  • High vibration options
  • Manufactured from corrosion-resistant titanium (6AL4V)
  • Excellent performance in corrosive media

About the MP40 Miniature Pressure Transducer

The MP40 model is a miniature pressure transducer with a flush
diaphragm for general pressure measurement applications. The transducers
are made of corrosion-resistant titanium (6AL4V). The inside of the
flush diaphragm is fitted with high-quality semiconductor strain gauges
that convert the deflection of the diaphragm into an electrical signal.Thanks
to the hermetically sealed reference side made of titanium, the MP40
series transducers can also be supplied for absolute pressure and
reference pressure (enclosed) as an option. The hermetically sealed head
section of this option is located directly behind the strain gauge
diaphragm area of the sensor. By sealing the sensitive strain gauges, a
considerable improvement and reliability of the transducer is achieved.
Versions with increased long-term stability and for high vibration
resistance, but also with integrated electronics (4 ... 20 mA) are
optionally available (for technical data, see separate data sheet
MP402).

Applications

  • Process engineering
  • Measuring and testing systems
  • Research and development
  • Laboratory devices and equipment
  • Level measurement
  • Process control

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Acceleration 100g any axis
Accuracy 0.25% to 0.5%
Burst pressure 6.0x Range
Compensated temperature -1 °C to 54 °C (30° to 130°F)
Input resistance (nominal) 1400 ± 400 Ohm
Insulation resistance minimum 50 MOhm @ 50 VDC
Maximum voltage 30 V for short periods
Measurement range 0 - 1 bar to 0 - 700 bar
Media compatibility Liquids & Gases compatible with Titanium 6AL4V
Operating temperature -18°C to 82°C (0° to 180°F)
Output 20 mV/V [5 VDC]
Output resistance (nominal) 850 ± 200 Ohm
Over pressure 2.0x Range
Pressure type gauge, absolute
Usable pressure 3.0x Range

Relaterade produkter

Behöver du något annat?

MP402 Miniature Pressure Transducer

  • Measuring range: 0 - 0.35 to 0 - 700 bar
  • 0.5% to 0.25% measuring accuracy
  • Made of corrosion-resistant titanium 
Datablad Visa produkt

XPC10 Miniature Pressure Sensor

  • Measuring range: 0 - 10 to 0 - 500 bar
  • Operating temperature: -40 to 220 ºC
  • For static and dynamic applications
Datablad Visa produkt