MP402 Miniature Pressure Transducer
Automatically compensates for line resistance and power supply changes
Nyckelfunktioner
- Flush-mountable, low-cost miniature pressure sensor
- Automatic compensation of line resistance and power supply changes
- Absolute or sealed reference options
- Options for long-term stability
- High vibration options
- Made from corrosion-resistant titanium (6AL4V)
- Excellent performance in most corrosive media
About the MP402 Miniature Pressure Transducer
Model MP402 is a low cost, miniature pressure sensor for general use that automatically compensates for line resistance and power supply changes. This transducer is made of corrosion-resistant titanium (6AL4V) and utilises bulk-type semiconductor strain gauges bonded directly to the inner surface of the machined diaphragm.The hermetic head is located directly behind the strain gauge diaphragm section of the sensor and seals the sensitive gauges in an inert environment, significantly increasing stability and reliability. Contact us for special temperature or pressure ranges and high vibration resistance.Long-term stability versions are available. Absolute or sealed reference sensors are optionally available.
Applications
- Test and measurement equipment
- Production equipment and controls
- Energy controls
- Laboratory devices and equipment
- Liquid level
- Calibration equipment
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Acceleration | 100g any axis |
Accuracy | 0.25% to 0.5% |
Burst pressure | 6.0x Range |
Compensated temperature | -1 °C to 54 °C (30° to 130°F) |
Input load resistance (standard) | 500 Ohm |
Insulation resistance minimum | 50 MOhm @ 50 VDC |
Maximum input voltage | 30 V for short periods |
Measurement range | 0 - 0.35 bar to 0 - 700 bar (0 - 5 psi to 0 - 10 kpsi) |
Media compatibility (wetted surface) | Liquids & Gases compatible with Titanium 6AL4V |
Output | 16 mA [24 VDC] |
Over pressure | 2.0x Range |
Pressure type | sealed, absolute, gauge |
Storage and operating temperature | -18°C to 82°C (0° to 180°F) |
Usable pressure | 3.0x Range |
Relaterade produkter
Behöver du något annat?
XPC10 Miniature Pressure Sensor
- Measuring range: 0 - 10 to 0 - 500 bar
- Operating temperature: -40 to 220 ºC
- For static and dynamic applications
XPM4 Miniature Pressure Transducer
- Measuring range: 0 - 5 to 0 - 200 bar
- Titanium construction
- Accuracy: 0.5% to 0.35%