ALF259 Miniature Diaphragm Load Cell
Miniature diaphragm load cell with bi-directional versions, for force measurements in confined spaces
Nyckelfunktioner
- Miniature diaphragm loadcell
- Measurement range: 25kg, 50kg, 100kg
- Tension, compression and bi-directional
- Non-lin./hysteresis: 0.5/0.5% RL
- Dimensions (mm): Ø12.7 x 9
- Easy installation
- Hardened stainless steel body
About the ALF259 Miniature Diaphragm Load Cell
The force sensor ALF259 is ideally suited to force measurements in confined spaces in both tension and compression for control of critical parameters in all kinds of industrial processes. Their versatility is such that they are also applied in a great number of important fields of scientific and engineering test work, mobile as well as workshop, static and dynamic.
Geometry: Very small loadbutton cell for force measurement in confined spaces. Used in compression and/or tension on a wide range of OEM or end-user applications.
With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.
Application area
- Industrial process
- Scientific and engineering test work
Other features ALF259
- Tension / compression / bi-directional calibration
- Standard 2 year warranty
All standard ranges are manufactured in stainless steel.
When this loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-1-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.2% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 5V |
| Hysteresis | ±0.5% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension, compression, bi-directional |
| Measurement range | 25kg, 50kg, 100kg |
| Non-linearity - terminal | ±0.5% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 100% RL |
| Rated output - nominal | 1.6mV/V |
| Rated output - rationalised | 1.0mV/V |
| Rationalisation tolerance (applies to single direction calibrations) | ±0.5% RL |
| Repeatability | ±0.1% RL |
| Sealing | IP65 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.03% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 6 to 7.5g |
| Zero load output | ±4% RL |
Relaterade produkter
Behöver du något annat?
ALF303 Miniature Load Cell
- Measurement range: 2000kg, 4000kg
- Low profile
- Sealed to IP65