01324 Rotating Torque Sensor
Rotary shaft torque sensor
Nyckelfunktioner
- Capacity: 0,35 / 0,71 / 1,41 / 3,53 / 7,06 / 12 / 23 / 56 / 113 / 226 / 565 / 1.130 / 1.700 / 2.260 Nm
- -53 to +121 °C (-65 to +250 °F) Operating temperature range
- Maximum shaft speed 5.000 rpm
- Non-linearity/ Hysteresis 0.10% of FS/0.10% of FS
About the 01324 Rotating Torque Sensor
These sensors are designed to measure rotating drive torque using a conventional shaft-to-shaft configuration for in-line placement. The design incorporates a coin silver slip ring assembly that transmits excitation voltage to, and output signals from, the rotating sensor. These sensors can be supplied with Auto-ID, which eliminates scaling when used with the PTI or PMAC 2000 instruments. An optical encoder to measure angle or speed is also available with this model.
Available options for 01324:
- 4 pin Bendix connector (non Auto-ID)
- 10 pin Bendix connector (Auto-ID)
- Integrated signal amplifier (+/-5V or +/-10V, 4-20mA)
- Integral optical encoder – 1024 ppr and 1500 ppr (requires 10 pin connector)
- Foot-mount
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Bridge resistance | 1000 Ω |
Capacity | 0.35 / 0.71 / 1.41 / 3.53 / 7.06 / 12 / 23 / 56 / 113 / 226 / 565 / 1130 / 1700 / 2260 Nm |
Compensated temperature range | +21 to +76 °C (+70 to +170 °F) |
Hysteresis | 0.10 % of FS |
Maximum shaft speed | 5000 rpm |
Non-linearity | 0.10 % of FS |
Operating temperature range | -53 to +121 °C (-65 to +250 °F) |
Output at fs | 2.0 mV/V nominal |
Overload capacity | 150 % of FS |
Supply voltage | 20 VDC |
Temperature effect on span | 0.002 % of reading/°F (0.004 % of reading/K) |
Temperature effect on zero | 0.002 % of FS/°F (0.004 % of FS/K) |
Zero balance | 1.00 % of FS |
Relaterade produkter
Behöver du något annat?
01325-hex Rotating Torque Sensor
- Measuring range: 6 or 14 Nm
- Strain gage based torque sensors
- Rotary socket sensor with hexagon end
01325-square Rotating Torque Sensor
- Measuring ranges: 6 to 271 Nm
- Rotary socket torque sensor with square end
- 150% of F.S. Overload capacity
01424 Rotating Torque Sensor
- Measurement range: 0,35 Nm to 2.260 Nm
- Max shaft speed 10.000 rpm
- Non-linearity 0.1 % F.S.