01325-hex Rotating Torque Sensor
Rotary socket torque sensor with hexagon end
Nyckelfunktioner
- Capacity: 6 or 14 Nm
- -40 to +85°C Operating temperature range
- Non-linearity/ Hysteresis: 0.10% of FS/0.10% of FS
- Maximum shaft speed 5.000 rpm
- 150% of F.S. Overload capacity
About the 01325-hex Rotating Torque Sensor
An angle encoder and round or square housings are available with this model. Square housings have optional foot mounts. These strain gage based sensors are designed to measure torque in low capacity applications such as checking calibration in mechanical torque wrenches and air powered nut runners. The design incorporates a coin silver slip ring assembly that transmits excitation voltage to, and output signals from, the rotating drive sensor. These sensors can be supplied with Auto-ID, which eliminates scaling when used with the PMAC 3000 Instrument.
Available options for 01325-hex:
- 4 pin Bendix connector (non Auto-ID)
- 10 pin Bendix connector (Auto-ID)
- Integral angle encoder - 1024 ppr or 60 tooth mag pick-up (requires 10 pin connector)
- Footmount
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Bridge resistance | 1000 Ohms |
Capacity | 6 / 14 Nm |
Compensated temperature | 70 to 170 °F |
Excitation voltage, maximum | 20 Vdc |
Housing | Aluminum |
Hysteresis | 0.10% of F.S. |
Maximum speed | 5000 RPM* |
Non-linearity | 0.10% of F.S. |
Output at f.s. | 2.0 mV/V, 3.0 mV/V |
Overload capacity | 150% of F.S. |
Shaft | Alloy Steel |
Temperature effect on span | 0.002% of Rdg./°F |
Temperature effect on zero | 0.002% of F.S./°F |
Useable temperature | -40 to +185°F |
Zero balance | 1.00% of F.S. |
Relaterade produkter
Behöver du något annat?
01325-square Rotating Torque Sensor
- Measuring ranges: 6 to 271 Nm
- Rotary socket torque sensor with square end
- 150% of F.S. Overload capacity
01424 Rotating Torque Sensor
- Measurement range: 0,35 Nm to 2.260 Nm
- Max shaft speed 10.000 rpm
- Non-linearity 0.1 % F.S.
90415 IRT Rotating Torque Sensor
- Measuring range 100 to 27.000 Nm
- Max shaft speed 15.000 rpm
- Non-linearity 0.05 %