1. Althensensors
  2. Sensorer
  3. Vridmomentgivare
  4. Roterande momentgivare
  5. 01325-square Rotating Torque Sensor

01325-square Rotating Torque Sensor

Rotary socket torque sensor with square end


Nyckelfunktioner

  • Capacity: 6 / 14 / 23 / 68 / 170 / 271 Nm
  • -40 to +85°C Operating temperature range
  • Non-linearity/ Hysteresis: 0.10% of FS/0.10% of FS
  • Maximum shaft speed 5.000 rpm
  • 150% of F.S. Overload capacity

About the 01325-square Rotating Torque Sensor

An angle encoder and round or square housings are available with this model. Square housings have optional foot mounts. These strain gage based sensors are designed to measure torque in low capacity applications such as checking calibration in mechanical torque wrenches and air powered nut runners. The design incorporates a coin silver slip ring assembly that transmits excitation voltage to, and output signals from, the rotating drive sensor. These sensors can be supplied with Auto-ID, which eliminates scaling when used with the PMAC 3000 instrument.

Available options for 01325-square:

  • 4 pin Bendix connector (non-Auto-ID)
  • 10 pin Bendix connector (Auto-ID)
  • Square or Hex drive
  • Integral angle encoder – 1024 ppr or 60 tooth mag pick-up (requires 10 pin connector)
  • Integrated amplifier; +/-5V, +/-10V or 4-20mA
  • Foot mount

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Bridge resistance 1000 Ohms
Capacity 6 / 14 / 23 / 68 / 170 / 271 Nm
Compensated temperature 70 to 170°F
Excitation voltage, maximum 20 Vdc
Housing Aluminum
Hysteresis 0.10% of F.S.
Maximum speed 5000 RPM*
Non-linearity 0.10% of F.S.
Output at f.s 1.5 mV/V, 2.0 mV/V, 3.0 mV/V
Overload capacity 150% of F.S.
Shaft Alloy Steel
Temperature effect on span 0.002% of Rdg./°F
Temperature effect on zero 0.002% of F.S./°F
Useable temperature -40 to +185°F
Zero balance 1.00% of F.S.

Relaterade produkter

Behöver du något annat?

01424 Rotating Torque Sensor

  • Measurement range: 0,35 Nm to 2.260 Nm
  • Max shaft speed 10.000 rpm
  • Non-linearity 0.1 % F.S.
Datablad Visa produkt

90415 IRT Rotating Torque Sensor

  • Measuring range 100 to 27.000 Nm
  • Max shaft speed 15.000 rpm
  • Non-linearity 0.05 %
Datablad Visa produkt